This small table top design is a valuable addition to the laboratory and can help increase efficiency in developing new materials or verifying your existing products are up to the required industry standards.
This tester follows the free-falling dart method and is ideal for testing Plastic Films, Coated Materials, Sheeted Materials, Nylons, and Building Materials. Meet ASTM D1709 Method A and Method B depending on the setup.
When testing materials an important factor to consider is environmental influences on performance. Materials often need to be evaluated at temperatures other than ambient to better quantify and predict how they will perform through the production process and, ultimately, for end-use application.
Selecting a materials tester is a major project – it takes time and investigation to ensure that the instrument will not only meet your needs today but provide room to grow as your testing needs expand.
Announcing the Automatic Pendulum Return feature for our ProTear Elmendorf Tear Tester. Now you can eliminate the need for the operator to “catch” the pendulum on the backswing and manually reset for each test.
Thwing-Albert is pleased to announce that Mr. David Zarrilli will be assuming the role of Director of Sales & Marketing. As David has been with Thwing-Albert for nearly 30 years, having spent most of that time in various sales and marketing positions, he brings a solid foundation and understanding of materials testing and the instrumentation required to meet the demands of today’s vigorous testing needs.
We would like to recognize Steven J. Berg, our current Vice President of Sales and Marketing, for his time on the TAPPI Board. He has held multiple positions including the Division Chairman for the Process and Product Quality Division, which oversees the physical, tissue, optical, and pulp and chemical committees.
A pharmaceutical company in need of an accurate, flexible, and consistent method to measure the seal strength of foil sealed single-dose medicine cups. Their current method was to peel the foil seal by hand and rely on an operator to determine if the seal strength was adequate. A test routine to remove operator influence and provide objective analysis was required to determine the optimum sealing parameters for their dosing cups.
Virtual Event Replay
