Model Name | 5kN Vantage NZ |
Industry | Adhesives, Corrugated, Foils/Metals, Food Testing, Medical, Nonwovens, Packaging, Paper, Paperboard, Plastic Film, Pulp, Rigid Plastics, Rubber/Foam, Tissue, Textiles |
Testing Property | Tensile, Peel, Compression, COF, Cycling, Tear, Burst, ZDT, Flex/Bend, Stress Relaxation, Thickness, Insertion/Extraction, and more. |
List of Standards | ASTM E4, ASTM F88, ASTM D790, ASTM D791, ASTM D882, ASTM D3330, ISO 5893, ISO 7500-1, ISO 9283, EN 1002/1-4, TAPPI T494, TAPPI T541, TAPPI T811, TAPPI T825, TAPPI T839. (This list shows common standards note that the Vantage can be configured to meet a vast list of standards for ASTM, ISO, TAPPI, DIN, NWSP and others.) |
Capacity | 5 kN (1125 lbs) |
Force Capacity | 5 kN (1125 lbs) |
Force Measurement | Interchangeable load cells range from 5N (1.1 lbf) to 5kN (1125 lbf) |
Force Accuracy | 10% to 100% Load Capacity: ±0.25% Measuring Value, Less than 10% Load Capacity: ±0.025% of Load Cell Capacity |
Force Resolution | 15 bit ADC (0.003% of 1.15 x Load Cell Capacity) |
Position Accuracy | ±6.4 micron/25 mm (± 0.00025/1.0 inch) or 0.025% of Distance |
Position Resolution | 1kN Frames: 0.17 μ (6.7 μin), 2kN Frames: 0.05 μ (2.1 μin), 5kN Frames: 0.11 μ (4.2 μin) |
Sample Frequency | Selectable: 50, 60, or 250 samples/second |
Crosshead Guidance | Precision Ball Screw |
Crosshead Speed | 1.3 to 1000 mm/min (0.05 to 40 in/min) |
Crosshead Speed Accuracy | 0.1 to 30 in/min: 1% of Set Speed, <0.1 in/min: 2% of Set Speed, >30 in/min: 2% of Set Speed |
Acceleration | 0.127 to 127 mm/sec2 (0.005 to 5 in/sec2) |
Maximum Power Consumption | 1kN & 2kN Frames: 0.6 VA, 5kN Single Column Frames: 1.5 VA, 5kN Dual Column Frames: 1.8 VA |
Power Requirements | 120-230 VAC ±10%, 50/60 Hz |
Operating Environment | Air Temperature – Operating: 10 to 50°C (50 to 122°F) Relative Humidity – Operating: 10% to 85% (Non-Condensing) |
Storage Environment | Air Temperature – Storage: -25 to 70°C (-13 to 158°F) Relative Humidity – Storage: 5% to 90% (Non-Condensing) |
Safety Features | Emergency Stop Button Upper and Lower Limit Switches with over-travel protection Electronic Grip Collision Detection Electronic Load Cell Overload Protection Mechanical Load Cell Overload Protection: – 50-250 N: 10 x Load Cell Capacity / 500-2000 N: 5 x Load Cell Capacity / 5-10 kN: 1.5 x Load Cell Capacity |
System Control | PC Based |
Software | REQUIRES: MAP4 Software |