180 Degree Peel Fixture

Perform 180 peel tests according to ASTM D3330 and other industry standards using this fixture designed for universal testing machines.  Consists of 9″ x 2″ polished stainless steel plate which is clamped in a lower grip. One end of the sample is adhered to the plate and the other end is clamped in place by the upper grip. The sample is peeled off of the plate and the strength is measured.

Descripción

Sample Type: Flexible Adhesive Material

  • Consists of:
    A polished stainless steel 9″ x 2″ plate (part #225-0480)
    Upper and lower grips (grips selected based on material and test method)
  • The sample plate is clamped in the lower grip
  • One end of the sample is adhered to the plate and the other end is clamped in place by the upper grip
  • The sample is peeled off of the plate and the strength is measured
  • The upper grip is typically lightweight to enable the use of a small load cell

Common Industry Standards:

ASTM D903 – Peel Or Stripping Strength Of Adhesive Bonds

ASTM D3330 – Peel Adhesion for Pressure Sensitive Tape 180°

PSTC 101, Method A – Peel Adhesion of Pressure Sensitive Tape

FINAT 1 –  Peel Adhesion Test (180 Degree)

ISO 29862 – Self-adhesive tapes — Determination of peel adhesion properties

JIS Z0237 – Peeling test for adhesive tapes

Peel Or Stripping Strength Of Adhesive Bonds

Información adicional

Industry

Adhesives

List of Standards

ASTM D903, ASTM D3330, PSTC 101 – Method A, FINAT 1, ISO 29862, JIS Z0237

Testing Property

Peel