747B Pneumatic Tensile Tester Grips (1.25kN)

General purpose pneumatic grips, 1.25kN (280 lbf)capacity.

Descripción

  • General purpose pneumatic, 1.25kN (280 lbf)capacity.
  • An open-ended design enables the loading of samples of varied widths and can be supplied with faces up to 152 mm (6 in) wide.
  • Designed for textiles and fabrics with lower tensile strength, and other materials.

Ideal for testing a wide range of sheet materials including plastic film, tape, paper, textiles, nonwovens, tissue, and adhesives. Air operation makes sample insertion faster and easier than with manual grips and ensures constant, uniform pressure from test to test. A variety of sizes of grip faces are available and can be configured as serrated, diamond serrated, line contact, or rubber covered. Different widths are available for most of the grip models.

The 747B features a lightweight design, essential for lower capacity testing, and an open area at the top large enough to easily load your sample. Recommended airline pressure is 60 PSI/4.0 bar.

Universal Tensile Grips, 1.25 kN (280 lbf) capacity. Designed for textiles and fabrics with low tensile strength, they enable the loading of multiple-width samples and accommodate faces up to 152.4 mm (6.0 in) wide. An air switch assembly with delay valve is required for proper operation.

Información adicional

Peso 0.000000 lbs
Capacity

1.25 kN (280 lbf)

Grip/Fixture Category

Pneumatic Grips

Grip Length

190 mm (7.5 in)

Max Sample Thickness

19 mm (0.75 in)

Max Sample Width

up to 101.6 mm (4.0 in)

Upper Grip Weight

1.8 kg (4.0 lb)

Descargas

747B Grips