747D Pneumatic Tensile Tester Grips (750 N)
General purpose pneumatic grips, 750N (170 lbf) capacity.
- General purpose pneumatic grips, 750N (170 lbf) capacity.
- An open-ended design enables the loading of samples of varied widths and can be supplied with faces up to 152 mm (6 in) wide.
- Ideal for thicker materials such as nonwovens, or roofing materials
Pneumatic grips are ideal for testing a wide range of sheet materials including plastic film, tape, paper, textiles, nonwovens, tissue, and adhesives. Air operation makes sample insertion faster and easier than with manual grips and ensures constant, uniform pressure from test to test. A variety of sizes of grip faces are available and can be configured as serrated, diamond serrated, line contact, or rubber covered. Different widths are available for most of the grip models.
All of the grips feature a lightweight design, essential for lower capacity testing, and an open area above the grip large enough for easily loading your sample. Recommended airline pressure is 60 PSI/4.0 bar.
Universal Tensile Grips, 750 N (170 lbf) capacity. Ideal for thick materials such as nonwovens, these grips accommodate samples that are 25.4 mm (1.0 in) thick. Utilizes faces up to 152.4 mm (6.0 in) wide. An air switch assembly with delay valve is required for proper operation.
Industry | Nonwovens |
---|---|
Measuring range | 750 N (168 lbf) |
Grip/Fixture Category | Pneumatic Grips |
Upper Grip Weight | 1.5 kg (3.25 lb) |
Grip Length | 140 mm (5.5 in) |
Max Sample Thickness | 25.4 mm (1.0 in) |
Max Sample Width | up to 152.4 mm (6.0 in) |