CeraTek ASL/1 Heat Sealers (12″ & 24″)

CeraTek Precision Laboratory Heat Sealer on an open back frame with upper and lower heated jaws, each independently controlled.

One set of 1” upper and lower sealing dies.

12″ (TA12-ASL/1) or 24″ (TA24-ASL/1) models available.

Description

CeraTek Precision Laboratory Heat Sealer on an open back frame with upper and lower heated jaws, each independently controlled.

  • 12″ or 24″ models available
  • Digital timer and temperature controller
  • Surface mounted thermocouples
  • Dual action cylinders
  • Electronic timer activation

The standard instrument includes one set of 1″ wide flat dies (one upper die and one lower die).

Available Options:

Power Options:
12″ Model = 110 V, 60 Hz
24″ Model = 220 V, 50 Hz

Serrated Sealing Dies (1″ width only) matched sets for upper and lower jaws are available with options for both type and direction of serrations:

  • Coarse serrations (6.5 serrations/inch)
  • Fine serrations (20 serrations/inch) Crosswise (perpendicular to 12″ length)
  • Lengthwise (parallel to 12″ length) A
  • Available flat surface die widths 1/8″, 1/4″, 3/8″, 1/2″, and 1″

Conforms to ASTM F2029 – Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength.

Additional information

Industry

Adhesives, Packaging

List of Standards

ASTM F2029

Model Name

CeraTek ASL/1

Part Number

12" (TA12-ASL/1) or 24" (TA24-ASL/1)

Testing Property

Adhesion, Seal Strength, Sample Preparation

Downloads

CeraTek ASL/1 Heat Sealer