Sample Preparation

Thwing-Albert offers sample preparation tools for a range of materials and sizes to meet required specimen sizes based on testing standards including tensile testing. We also offer CeraTek Heat Sealers for seal strength testing.

Items 1 to 10 of 19 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Ascending Direction
  1. TA810/1-CE - Laboratory Thermoformer

    Laboratory Thermoformer TA810/1-CE

    The TA810/1-CE is a self contained sheet fed laboratory thermoformer designed for a variety of applications.  This thermoformer has a broad spectrum of capabilities unequalled in the industry making it ideal for small production runs to produce prototypes and samples.

      

  2. CeraTek 24-ASG/1 Heat Sealer

    CeraTek TA24-ASG/1 Heat Sealer

    24" CeraTek Heat Sealer Model features eight temperature zones along the length of the upper heated jaw (each of the eight zones is independently controlled via eight separate temperature controllers).  Each zone is 2 7/8” x 1” and there is 1/8” between each zone to minimize the effects of heat transfer from adjacent zones.

      

  3. CeraTek 4-GL/1 Heat Sealer

    CeraTek TA4-GL/1 Heat Sealer

    CeraTek TA4-GL/1 Heat Sealer 4-Zone Gradient Hot Bar Laboratory Heat Sealer.  

    This model features four temperature zones along the length of the upper heated jaw and four temperature zones along the length of the lower heated jaw (each of the eight zones is independently controlled via eight separate temperature controllers).

      

  4. TASL-1 Heat Sealer

    CeraTek TA12-ASL/1 Heat Sealer

    CeraTek Precision Laboratory Heat Sealer on an open back frame with upper and lower heated jaws, each independently controlled.

    One set of 1” upper and lower sealing dies.

    12" or 24" models available.

      

  5. TAS-1 Heat Sealer

    CeraTek TA12-AS/1 Heat Sealer

    CeraTek Precision Heat Sealer on an open-back frame featuring a digital timer and temperature controller. 

    One flat upper sealing die 1” wide.

    12" and 24" models available.

      

  6. CAP-21 Pneumatic Cutter

    Pneumatic Corrugated Cutter

    Model CAP is a pneumatic sample cutter used to prepare samples of corrugated board. The pneumatic drive system and sturdy, precise mechanical construction ensures rapid, accurate sample preparation. The cutter includes a template for cutting a corrugated strip, tools and a set of 10 spare cutting blades.Serving the testing industry for over a century, Thwing-Albert is committed to providing the best possible solution for any application.

      

  7. Circular Sample Cutter 50 cm2

    Circular Sample Cutter (PS50)

    This manual circular sample cutter quickly prepares samples used for determining basis weight of sheet materials including paper, textiles, and plastic films.

    Cutter Area: 50 cm2

      

  8. Circular Sample Cutter PS10

    Circular Sample Cutter (PS10)

    This manual circular sample cutter quickly prepares samples used for determining basis weight of sheet materials including paper, textiles, and plastic films.

    Cutter Area: 10 cm2

      

  9. Circular Sample Cutter 175B

    Circular Sample Cutter (175B)

    Serving the testing industry for over a century, Thwing-Albert is committed to providing the best possible solution for any application.This Circular Sample Cutter quickly prepares samples used for determining basis weight of sheet materials including paper, textiles, and plastic films.

    Cutter Area:  100 cm2

      

  10. MTT Strip Cutter - 1" Tensile Test Sample

    MTT 1" Strip Cutter

    This manual strip cutter quickly prepares samples 1 inch (25.4 mm) wide for measuring material tensile or seal strength. Its sturdy mechanical design ensures the preparation of accurate test samples, critical for ensuring the integrity of your test data. It is equipped with a safety locking system that shields the blades while not being used to prepare samples.

    $375.00

      

Items 1 to 10 of 19 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Ascending Direction