EJA Vantage-10 Tensile Tester (10kN)
The Vantage-10 has a dual screw frame and is ideal for Quality Control, Engineering, and for Research and Development.
Capacity: 10kN (2000 lbs)
The EJA Vantage tensile testers are powerful computer-controlled tensile testers with the flexibility to perform a wide range of tests including tensile, flexural, compression, peel, tear, friction, cycling and modulus.
Capable of testing above and below the moving crosshead, the Vantage-10 provides maximum testing flexibility. It can be configured with two load cells and a variety of test fixtures enabling the operator to switch from one test to another without any downtime.
- The Vantage is ideal for Quality Control, Engineering, and for Research and Development
- Capacity: 10kN, 2000 lbs
- The EJA Vantage 10 Tensile Tester is available in two sizes:
24" (610 mm)
42" (1067 mm) - Extensive selection of grips and fixtures
- Broad range of tests including tensile, peel, compression, cycling, tear, burst, ZDT, flex/bend, stress relaxation and insertion/extraction
- Grips can be supplied with frame-mounted pneumatic switches to simplify testing and improve repeatability
- Automatic electronic calibration
- One-touch auto zero
- One serial interface to a PC
- Serial load cell interface
- Movable test control panel
- Easy installation
Variety of Grips & Fixtures
Manual and air-operated grips, compression plates, environmental chambers, peel, coefficient of friction, burst, and puncture fixtures provide endless test
possibilities.
Windows 7, 8 and 10 compatible with MAP-4 Software.
| Model Name | 10kN EJA Vantage |
|---|---|
| Capacity | 10 kN (2000 lbs) |
| Industry | Adhesives, Corrugated, Foils/Metals, Food Testing, Medical, Nonwovens, Packaging, Paper, Paperboard, Plastic Film, Pulp, Rigid Plastics, Rubber/Foam, Tissue, Textiles |
| Testing Property | Adhesion, Burst, Compression, Coefficient of Friction, Elongation, Flexural Strength, Opening Force, Peel, Tensile, ZDT |
| Force Capacity | 10 kN (2000 lbs) |
| Force Measurement | Interchangeable load cells available |
| Force Accuracy | 10% to 100% Load Capacity: ±0.25% Measuring Value|Less then 10% Load Capacity: ±0.025% of Load Cell Capacity |
| Force Resolution | 16 Bit A/D to 0,001 N |
| Position Resolution | 0,6 µm (0.00002 inch) |
| Position Accuracy | 2.5 µm/25 mm (±0.0001 inch/1.0 inch)or 0.01% of Distance |
| Crosshead Guidance | Precision Ball Screw with Independent Ground|Stainless Steel Guide Rods |
| Horizontal Clearance | 412.75 mm (16.25 in) |
| Depth Clearance | Unlimited |
| Crosshead Speed | 1 to 1000 mm/min (0.05 to 40 in/min) |
| Crosshead Speed Accuracy | 0.10% |
| Operating Environment | Air Temperature: 10° to 50° C (50° to 122° F)|Relative Humidity: 10% to 85% (Non-Condensing) |
| Storage Environment | Air Temperature: -25° to 70° C (-13° to 158° F)|Relative Humidity: Storage: 5% to 90% (Non-Condensing) |
| Power Requirements | 110V 50 or 60Hz, 220V 50Hz, 230V 50Hz, 240V 50Hz |
| Safety Features | Emergency stop button, upper & lower limit switches with over-travel protection and load cell overload protection |
| System Control | PC-Based with serial interface (No PC slave cards) |
| Software Available | REQUIRES: MAP-4 Software OR Touch Screen Tablet |
Computer Requirements
| Operating System | Windows 7, Windows 8, Windows 10 (Requires: Microsoft .NET Framework 4.5) |
|---|
