Description
Thwing-Albert offers a full range of Laboratory Pulpers. Pulpers are indispensable for evaluating secondary fiber processes, additives and quality.
| Model | Capacity | Rank Volume | Weight | Consistency Range | Dimensions W x L x H (in) |
|---|---|---|---|---|---|
| H-100 | 30 to 350 AD gm | 8 liters (2 gal) | 23 kg (50 lbs) | 2 to 7% | 11 x 25 x 17 |
| H-100 | 50 to 100 AD gm | 2.5 liters (85 oz) | 18 kg (40 lbs) | 2 to 18% | 10 x 20 x 14 |
| N-100V | 450 AD gm (15% consistency) | 12 liters (3 gal) | 41 kg (90 lbs) | 5 to 15% | 12 x 20 x 17 |
| J-100 | 1800 (6% consistency) | 40 liters (10.5 gal) | 55 kg (120 lbs) | 2 to 7% | 14.5 x 30 x 16 |
| J-100H | 1800 (7% consistency) | 40 liters (10.5 gal) | 40 liters (10.5 gal) | 3 to 15% | 20 x 40 x 26 |
H-100 Maelstrom (H-100V):
The H-100 is constructed of stainless steel throughout and has a motor that is 1/2 HP, 120 V, 60 Hz with a V belt drive. The pulper is supplied with a clear polycarbonate lid that enables stock visualization. It has an optional variable speed motor control and an external heater with digital temperature control.
H-200 Maelstrom (H-200V):
The H-200 is designed to accommodate small sample sizes and wide consistency ranges. It is constructed of stainless steel throughout and has a motor that is 3/4 HP with a gear belt drive. The pulper is supplied with a clear polycarbonate lid that enables stock visualization. It has an optional variable speed motor control (120V/60 Hz, Max Amp 15.5 amps) and a silicone heater mat (375 watt) with digital temperature control.
N-100V 450 H High Consistency (N-100T):
The N-100V is a small scale, compact pulper for high consistency defibering of virgin or secondary fiber. It is constructed of stainless steel throughout and has a motor that is 2 HP, 230 V/60 Hz, 3 Phase with variable speed controller and a gear belt and pulley drive system. The pulper is supplied with a clear polycarbonate lid that enables stock visualization. It has an optional silicone heater mat with digital temperature control.
J-100 1800 Laboratory Pulper (J-100V):
The J-100 is ideal for defibering virgin or secondary fiber in 4 pound batch sizes. Designed for large commercial scale operations it is constructed of stainless steel throughout and has a motor that is 1 HP, 115/220 V, 50/60 Hz, 1 Phase TEFC and a V belt and pulley drive system (633 max rpm). The pulper has a convenient rim mounted dilution/washout shower, stainless steel finger-spring type shaft seal, and permanently lubricated bronze rotor bearing and housing. It has an optional variable speed motor control, and an external heating jacket with digital temperature control.
J-100H 1800 Laboratory Pulper (J-100HV):
The J-100H is designed for high consistency pulps to separate secondary fibers from contaminate bodies without excessive size reduction of the contaminates. Ideal pulper for use in de-inking and cleaning studies. Extremely durable, it is constructed of stainless steel throughout and has a motor that is 3 HP, 230/460 V, 50/60 Hz, 3 Phase TEFC and a gear belt and pulley drive system. The pulper has a convenient rim mounted dilution/washout shower, 1” pillow block shaft bearings & packing gland mounted 3/8” thick bracket. It has an optional variable speed motor control, and an external heating jacket with digital temperature control.
![N-100 [450 AD gm (15% consistency)]](/wp-content/uploads/2021/07/ard_n100_1.jpg)
![J-100 [1800 (7% consistency)]](/wp-content/uploads/2021/07/ard_j100hpulper_1.jpg)
![H-200 [50 to 100 AD gm]](/wp-content/uploads/2021/07/ard_h200v_1.jpg)
![H-100 [30 to 350 AD gm]](/wp-content/uploads/2021/07/ard_h100maelstrom_1.jpg)
