The Rycolab RL-IBT-A is used to determine the internal bonding strength of paper according to the Scott Bond method.
This device comes with a built-in digital display and is microprocessor controlled. The standard configuration is delivered with a medium range pendulum. All the parts are built into a sturdy steel frame. A pendulum mechanism pulls the pendulum back to starting position if the test is carried out. Push down sample holder for quick changing of the base plate with the sample and the aluminum angle.
The sample that needs testing is placed in the measuring area. By pushing the start button the pendulum is released and hits the aluminum angle, glued to the sample with double adhesive tape. The sample is pushed away and the needed energy is measured and displayed in J/m².
Digital display, microprocessor controlled
Automatic pendulum return to starting position
Easy inserting of the sample base with a quick changing mechanism
Delaminating angle of the pendulum to the surface of the sample: 90°
Easy insertion of the sample base with a quick changing mechanism
5 support base and 5 aluminum angles as standard delivery
Display of values options include:J/m², kg/cm, ft.lb/in²
RS232 PortElectricity: 110-230 V, 50-60 Hz AC
Air: 87psi (600kPa)
Instrument Dimensions (W x D x H):600 x 300 x 550mm (24 x 12 x 22 in)
Packaging Dimensions (W x D x H):750 x 450 x 700mm (30 x 18 x 28 in)
Net Weight: 20kg (44 lbs)
Gross Weight: 32kg (71 lbs)
Applicable Standards: TAPPI T569, TAPPI T833
RL-IBT-A4 Device w/ manual sample preparation station
RL-IBT-A2 Device w/ automatic sample preparation station
Instrument with sample preparation station
5 base plates
5 aluminum angles
1 double adhesive tape
Medium range pendulum (1.050 J/m2) More optional pendulums: see below