Vantage-10 Tensile Tester (10kN)

The Vantage-10 has a dual screw tensile testing frame and is ideal for Quality Control, Engineering, and for Research and Development.

Capacity: 10kN (2000 lbs)

Description

The EJA Vantage 10 kN tensile tester is a powerful computer-controlled tensile tester with the flexibility to perform a wide range of tests including tensile, flexural, compression, peel, tear, friction, cycling and modulus.

Capable of testing above and below the moving crosshead, the Vantage-10 provides maximum testing flexibility. It can be configured with two load cells and a variety of test fixtures enabling the operator to switch from one test to another without any downtime.

  • The Vantage is ideal for Quality Control, Engineering, and for Research and Development
  • Capacity: 10kN, 2000 lbs
    VantageNX Systems available from 1kN to 5kN
  • The EJA Vantage 10 Tensile Tester is available in two sizes:
    24″ (610 mm)
    42″ (1067 mm)
  • Extensive selection of grips and fixtures
  • A broad range of tests including tensile, peel, compression, cycling, tear, burst, ZDT, flex/bend, stress relaxation and insertion/extraction
  • Grips can be supplied with frame-mounted pneumatic switches to simplify testing and improve repeatability
  • Automatic electronic calibration
  • One-touch auto zero
  • One serial interface to a PC
  • Serial load cell interface
  • Movable test control panel
  • Easy installation

Variety of Grips & Fixtures
Manual and air-operated grips, compression plates, environmental chambers, peel, coefficient of friction, burst, and puncture fixtures provide endless test
possibilities.

Windows compatible with MAP4 Software.

Additional information

Capacity

10 kN (2000 lbs)

Crosshead Guidance

Precision Ball Screw with Independent Ground, Stainless Steel Guide Rods

Crosshead Speed

1 to 1000 mm/min (0.05 to 40 in/min)

Crosshead Speed Accuracy

0.10%

Depth Clearance

Unlimited

Force Accuracy

10% to 100% Load Capacity: ±0.25% Measuring Value, Less then 10% Load Capacity: ±0.025% of Load Cell Capacity

Force Capacity

10 kN (2000 lbs)

Force Measurement

Interchangeable load cells available

Force Resolution

16 Bit A/D to 0,001 N

Horizontal Clearance

412.75 mm (16.25 in)

Industry

Adhesives, Corrugated, Foils/Metals, Food Testing, Medical, Nonwovens, Packaging, Paper, Paperboard, Plastic Film, Pulp, Rigid Plastics, Rubber/Foam, Tissue, Textiles

Model Name

10kN EJA Vantage

Operating Environment

Air Temperature: 10° to 50° C (50° to 122° F), Relative Humidity: 10% to 85% (Non-Condensing)

Position Accuracy

2.5 µm/25 mm (±0.0001 inch/1.0 inch)or 0.01% of Distance

Position Resolution

0,6 µm (0.00002 inch)

Power Requirements

110V 50 or 60Hz, 220V 50Hz, 230V 50Hz, 240V 50Hz

Safety Features

Emergency stop button, upper & lower limit switches with over-travel protection and load cell overload protection

Software Available

REQUIRES: MAP-4 Software

Storage Environment

Air Temperature: -25° to 70° C (-13° to 158° F), Relative Humidity: Storage: 5% to 90% (Non-Condensing)

System Control

PC-Based with serial interface (No PC slave cards)

Testing Property

Adhesion, Burst, Compression, Coefficient of Friction, Elongation, Flexural Strength, Opening Force, Peel, Tensile, ZDT

Downloads

Vantage 10kN