Downloads
Details
The VantageNX Universal Testing Machine is a revamped design of the EJA Vantage Series of Tensile Testers. With a small footprint and ergonomic design testing can be completed efficiently with this instrument. The VantageNX is commonly used to test a variety of materials including corrugated board, cardboard, plastic film, flexible packaging, food products, paper, paperboard, tissue paper, textiles, and many other varieties.
- Ideal for Quality Control, Engineering, and for Research and Development
- The small footprint and ergonomic design makes the VantageNX an asset in any testing laboratory
- Ergonomic Frame
- Single Column Frame with Small 16” x 17” Footprint
- Dual Column Frame with 23” x 19” Footprint
- 24-48" Travel
- Automatic Electronic Calibration
- One-Touch Auto Zero
- Electronic Air Switches
- Serial Load Cell Interface
- Available Universal Tester Options:
- VantageNX-1
Capacity: 1kN, 225 lbf
Models: 24" (610 mm), 36" (915 m), 48" (1219 mm) - VantageNX-2
Capacity: 2kN, 450 lbf
Models: 24" (610 mm), 36" (915 mm), 48" (1219 mm) - VantageNX-5
Capacity: 5kN, 1125 lbf
Models: 24" (610 mm), 36" (915 mm), 48" (1219 mm) - VantageNX Duo [Dual Column]
Capacity: 5kN, 1125 lbf
Models: 26" (660 mm), 36" (915 m), 47" (1194 mm) - 10kN machines see the EJA Vantage Series
- VantageNX-1
Thwing-Albert offers a wide range of grips, fixtures and accessories to outfit your VantageNX to enable the ability to meet many industry standards including ASTM, TAPPI, ISO, DIN, and others. Some common standards include ASTM E4, ISO 5893, ISO 7500-1, ISO 9283, EN 1002/1-4.
Instrument Control Options (Choose One):
MAP4 Windows Based Software with Adjustable Keypad (PC required)
(or)
Touch Screen Instrument Controller for Simplified Test Control (no PC required)
- MAP4™ Software
This software equips the VantageNX with Windows® 7, 8 and 10 operating system compatibility. It incorporates complex data analysis capabilities and detailed motion control to configure the machine to run unlimited test methods. A magnetic test control keypad also provides convenient access to basic test functions. NOTE: Computer not included.
- Touch Screen Instrument Controller (Nexus® Tablet)
When you choose the option to control the VantageNX using the touch screen tablet a built-in Bluetooth system allows the machine to run tests and provide reports as a stand-alone instrument without the need of a computer. The touch screen instrument controller can run tensile, compression, peel and COF tests out of the box. Testing setup is easy and minimal operator training is required. Data can be exported through a wireless internet connection or printed on a network printer.
Additional Information
Model Name | Vantage NX |
---|---|
Capacity | 1kN, 2kN, 5kN |
Industry | Adhesives, Corrugated, Foils/Metals, Food Testing, Medical, Nonwovens, Packaging, Paper, Paperboard, Plastic Film, Pulp, Rigid Plastics, Rubber/Foam, Tissue, Textiles |
Testing Property | Adhesion, Burst, Compression, Coefficient of Friction, Elongation, Flexural Strength, Opening Force, Peel, Tensile, ZDT and more |
List of Standards | ASTM E4, ISO 5893, ISO 7500-1, ISO 9283, EN 1002/1-4 |
Force Capacity | Varies by model from 5N (1.1 lbf) to 5kN (1125 lbf) |
Force Measurement | Interchangeable load cells range from 5N (1.1 lbf) to 5kN (1125 lbf) |
Force Accuracy | 10% to 100% Load Capacity: ±0.25% Measuring Value | Less than 10% Load Capacity: ±0.025% of Load Cell Capacity |
Force Resolution | 16 Bit A/D to 0,001 N |
Position Resolution | 0,6 µm (0.00002 inch) |
Crosshead Guidance | Precision Ball Screw |
Crosshead Speed | 1 to 1000 mm/min (0.05 to 40 in/min) |
Operating Environment | Air Temperature: 10° to 50° C (50° to 122° F) | Relative Humidity: 10% to 85% (Non-Condensing) |
Storage Environment | Air Temperature: -25° to 70° C (-13° to 158° F) | Relative Humidity: 5% to 90% (Non-Condensing) |
Power Requirements | 110V 50 or 60Hz, 220V 50Hz, 230V 50Hz, 240V 50Hz |
Safety Features | Emergency stop button, upper & lower limit switches with over-travel protection and load cell overload protection. |
System Control | PC Based or Tablet |
Software Available | REQUIRES: MAP4 Software OR Touch Screen Tablet |
You may also be interested in the following product(s)
![]() 733K Pneumatic Grips (500 N, 100 lbf) |
![]() 90 Degree Peel Fixture |
![]() MAP4 Materials Testing Software |
![]() JDC Precision Cutter (10" samples) |
Computer Requirements
Operating System | Windows 7, Windows 8, Windows 10 (Requires: Microsoft .NET Framework 4.5) |
---|