CeraTek Heat Sealers

The CeraTek line of heat sealers is ideal for a variety of applications including material testing, plastic film evaluation and quality control. These bar and tray heat sealers can be used for wide range of industries including plastic film manufacturers, converters, printing ink companies, chemical companies, and consumer product manufacturers.

9 Item(s)

per page

List  Grid 

Set Descending Direction
  1. TAS-1 Heat Sealer

    CeraTek TA12-AS/1 Heat Sealer

    CeraTek Precision Heat Sealer on an open-back frame featuring a digital timer and temperature controller. 

    One flat upper sealing die 1” wide.

    12" and 24" models available.

      

  2. TASL-1 Heat Sealer

    CeraTek TA12-ASL/1 Heat Sealer

    CeraTek Precision Laboratory Heat Sealer on an open back frame with upper and lower heated jaws, each independently controlled.

    One set of 1” upper and lower sealing dies.

    12" or 24" models available.

      

  3. CeraTek 24-ASG/1 Heat Sealer

    CeraTek TA24-ASG/1 Heat Sealer

    24" CeraTek Heat Sealer Model features eight temperature zones along the length of the upper heated jaw (each of the eight zones is independently controlled via eight separate temperature controllers).  Each zone is 2 7/8” x 1” and there is 1/8” between each zone to minimize the effects of heat transfer from adjacent zones.

      

  4. CeraTek 4-GL/1 Heat Sealer

    CeraTek TA4-GL/1 Heat Sealer

    CeraTek TA4-GL/1 Heat Sealer 4-Zone Gradient Hot Bar Laboratory Heat Sealer.  

    This model features four temperature zones along the length of the upper heated jaw and four temperature zones along the length of the lower heated jaw (each of the eight zones is independently controlled via eight separate temperature controllers).

      

  5. CeraTek 12-P/2 Heat Sealer

    CeraTek TA12-P/2 Pass Thru Heat Sealer

    CeraTek TA12-P/2 Heat Sealer is a precision pass-thru heat sealer. The maximum pass-thru width and the maximum recommended seal width are 11.5”. The machine design allows both front-to-back and lateral pass-thru capabilities. The cycle is activated with a locking foot switch circuit. Safety features include zero access guarding and an e-stop circuit.

    12" and 24" models available.

      

  6. Ceratek 12-IH/2 Impulse Bar Heat Sealer

    CeraTek TA12-IH/2 Impulse Bar Heat Sealer

    CeraTek TA12-IH/2 Laboratory Impulse Bar Heat Sealer featuring dual action cylinders, electronic timer activation, digital heating & cooling timers, a digital pressure meter and a digital temperature controller. The wire temperature is controlled via a special temperature controller designed for applications requiring a significantly higher response speed than traditional constant heat systems. The temperature is monitored with a thermocouple located on the seal bar. 220 Volts, 50/60 Hz.

    12" and 24" models available.

      

  7. TA810/1-CE - Laboratory Thermoformer

    Laboratory Thermoformer TA810/1-CE

    The TA810/1-CE is a self contained sheet fed laboratory thermoformer designed for a variety of applications.  This thermoformer has a broad spectrum of capabilities unequalled in the industry making it ideal for small production runs to produce prototypes and samples.

      

  8. CeraTek TA 808/1 Blister Sealer

    CeraTek Blister Heat Sealer TA808/1

    The CeraTek TA808/1 Hot Die Blister Heat Sealer features a digital timer and temperature controller with build-ups and rails.

      

  9. CeraTek 630 Shuttle-Style Blister Sealer

    CeraTek Shuttle-Style Blister Sealer TA630

    The CeraTek TA630 Shuttle-Style Blister Sealer is a semi-automatic shuttle blister heat sealer with built-in versatility, low tooling cost and efficient operation.

      

9 Item(s)

per page

List  Grid 

Set Descending Direction