Plastic Film Testing Instruments

Plastic Film Testing Instruments

Testing equipment for measuring the physical properties of plastic film materials.

Items 1 to 10 of 24 total

per page
Page:
  1. 1
  2. 2
  3. 3

List  Grid 

Set Descending Direction
  1. FP-2260 Friction/Peel Tester

    FP-2260 Friction/Peel Tester

    This Coefficient of Friction Tester (COF) / Peel Tester can measure static and kinetic coefficient of friction as well as run seal strength tests, 180° peel, 90° peel, and T-peel tests.  The FP-2260 also offers a tensile test mode to perform lightweight tensile tests up to 10 kg (22 lbf).    

    Its small bench top design makes the FP-2260 light weight allowing it to be used in a laboratory or setup out on the production floor for offline testing as needed. 

    Plastic film, paper, paperboard, adhesives, labels and packaging materials are ideally tested with the FP-2260.  

    Replaces the FP-2255.

      

  2. Ceratek 12-IH/2 Impulse Bar Heat Sealer

    Ceratek 12-IH/2 Impulse Bar Heat Sealer

    Ceratek 12-IH/2 Laboratory Impulse Bar Heat Sealer featuring dual action cylinders, electronic timer activation, digital heating & cooling timers, a digital pressure meter and a digital temperature controller. The wire temperature is controlled via a special temperature controller designed for applications requiring a significantly higher response speed than traditional constant heat systems. The temperature is monitored with a thermocouple located on the seal bar. 220 Volts, 50/60 Hz.

    12" and 24" models available.

      

  3. CeraTek 12-P/2 Heat Sealer

    CeraTek 12-P/2 Heat Sealer

    CeraTek 12-P/2 Heat Sealer is a precision pass-thru heat sealer. The maximum pass-thru width and the maximum recommended seal width are 11.5”. The machine design allows both front-to-back and lateral pass-thru capabilities. The cycle is activated with a locking foot switch circuit. Safety features include zero access guarding and an e-stop circuit.

    12" and 24" models available.

      

  4. Thwing-Albert Vantage NX

    Vantage NX Universal Testing Machine

    The VantageNX Universal Testing Machine is a powerful tool that can be equpped to meet a variety of materials testing needs.  Many fixtures and grips are available for tensile testing, COF and other tests for the plastic film, flexible packaging, food packaging, paper, paperboard, tissue paper, textiles testing, and many other industries.  This universal materials testing frame can be setup for many tests when combined with the right grips and fixtures.

    - Capacities - 1kN & 2kN
    - Windows 7 & 8 compatible with MAP-4 Software

      

  5. Friction Tester with Heated Platen

    Heated Platen FP-2260 Friction/Peel Tester

    The heated platen allows for testing at elevated temperatures.  Ideal for plastic film testing.  Its small bench top design makes the FP-2260 light weight allowing it to be used in a laboratory or setup out on the production floor for offline testing as needed.

    Temperature range from:
    21C to176.7C
    (70F to 350F)

    Plastic film, adhesives, labels and packaging materials are ideally tested with the FP-2260 heated platen option.

      

  6. Dart Drop Impact Tester

    Dart Drop Impact Tester

    The Thwing-Albert the dart drop impact tester is an easy-to-use, ergonomically designed instrument used to measure the impact resistance of plastic film, coated paper and other materials utilizing the free falling dart method.

      

  7. Spencer Impact Tester

    Spencer Impact Tester

    The Spencer Impact Attachment was developed for use with Thwing-Albert's Elmendorf Tear Tester.

      

  8. Thwing-Albert Universal Testing Machine - EJA Vantage

    EJA Vantage Series Tensile Testers

    The Vantage Tensile Tester offers many fixtures for tensile testing, COF and other tests for the plastic film, flexible packaging, food packaging, paper, paperboard, tissue paper, textiles testing, and many other industries.  This universal materials testing frame can be setup for many tests when combined with the right grips and fixtures.

    - Capacities ranging from 1kN to 10kN
    - Windows 7 compatible with MAP-4 Software

      

  9. QC-3A Universal Materials Tester

    QC-3A Universal Testing Machine

    Thwing-Albert's QC Electronic Materials Testers provide quality solutions and have earned a well-deserved reputation as an easy-to-use, dependable testing platform. The QC-3A upholds the standards of the QC line while adding the functionality of a RS-232 interface, a digital load controller and enhanced software. Ideal for tensile, compression, coefficient of friction and peel analysis, the QC-3A is an extremely flexible, cost-effective testing system. The single-screw frame provides up to 1100 lbs (5kN/500 kg) tensile force with extremely accurate control throughout the entire load range. The digital load controller ensures extremely accurate, reliable test data.

      

  10. Blocking Fixture for ASTM D3354

    Film Blocking Test Fixture for ASTM D3354

    This fixture is used to meet ASTM D3354 Blocking Testing of Plastic Film.

      

Items 1 to 10 of 24 total

per page
Page:
  1. 1
  2. 2
  3. 3

List  Grid 

Set Descending Direction